Koozali.org: home of the SME Server

Obsolete Releases => SME 7.x Contribs => Topic started by: mgb on August 19, 2008, 08:05:45 AM

Title: INSTALL SME 7.3 SATA drives not found
Post by: mgb on August 19, 2008, 08:05:45 AM
new pc asus motherboard p5vd2-vm se
install sme dd
i copy LinuxDrivers from cdroom "p5vd2-vm se" to usb is work ok
is stop to install is no find driver in usb
help

i test to install sme 8 is  install ok
help to install sme 7.3
ftp://217.194.194.156/LinuxDrivers
Title: Re: INSTALL SME 7.3 SATA drives not found
Post by: elmarconi on August 19, 2008, 10:07:44 PM
Checkout this thread:

http://forums.contribs.org/index.php?topic=32067.0

I've had the same experience. Tried to find a solution for two days, then decided that buying another Mobo was the best solution by far. Swap memory/processor/etc. and up and running in no-time. The P5VDC-MX is now punished by having to run XP.  :twisted:
Title: Re: INSTALL SME 7.3 SATA drives not found
Post by: mazkot on August 20, 2008, 02:33:12 AM
try:

sme ide-all-generic

Title: Re: INSTALL SME 7.3 SATA drives not found
Post by: mgb on August 20, 2008, 08:26:38 AM
is work the

sme sme   pci=nommconf acpi=off all-generic-ide
  edit /boot/grub/grub.conf

all-generic-ide
help from
http://forums.contribs.org/index.php?topic=38660.0
Title: Re: INSTALL SME 7.3 SATA drives not found
Post by: NoTo on August 20, 2008, 12:06:08 PM
I had similar issues on a modern Fujitsu P4 system, but thre were settings in the BIOS to add legacy features etc and present itself as IDE, which cured the problem for me. Can look into those features in greater detail if deemed appropriate for your situation.
Title: Re: INSTALL SME 7.3 SATA drives not found
Post by: mgb on August 21, 2008, 08:30:11 AM
Thanks for the help
 If SME optimal worker  after   installation {setup} with   sme   pci=nommconf acpi=off all-generic-ide

 t's worthwhile to try to install   an element SATA
it is possible ?
That exists   in the    disk  of  installation disk with the board  asus