Topic: Modem Alcatel USB

[daniel klumpp]

Hi,

I would know if the modem Alcatel USB for ADSL work with e-smith distribution ?

A+

[Alexie]

Hi There..

If your modul is this one: Alcatel Speed TouchTM USB.
Then i think you can get it to work..

Link: http://www.alcatel.com/consumer/dsl/supuser.htm

As the modems described above are in transparent mode, they support any platform including Windows 2000 or Millenium. In always-on connection (PPPoA), they are dependant of Windows, and Windows 2000 still includes the necessary support.
We will support Windows 2000 for our driver-dependant modems such as USB and PC in a second phase.



3. How about Linux?

Same story here, supported when in bridging mode by the Speed Touch Home and Pro

Hope that help.!!

[Mahmood Al-Yousif]

I've been trying to get the Alcatel USB to work with e-Smith to no avail. I have receive the SpeedTouch Pro as well but that doesn't work either.

I have to admit that it is not e-Smith's problem, rather with configuration of the Pro. I have installed it on eth1, can ping 10.0.0.1 (eth1) and 10.0.0.138 (pro) and 172.16.1.1 (atm side of pro) BUT I cannot ping 172.16.1.2 (telco ATM side) and it is here that the problem lies I think as I don't know if they changed their default IP address there.

Also, what is the "initial IP address" that could be set on the modem? Do I have to set that on the same subnet as my eth0 (not 1) so that they can talk to each other. The manual is confusing, though much better than others I have seen.

If you have experience setting this up, please let me know.

I need to get the SpeedTouch USB, Home and Pro to work! Now you can understand why I haven't slept for the past two weeks!

regards
Mahmood