Topic: Getting diald to work

[Gryf]

Hi!

I got some problems getting diald to work.

Here is a bit from /var/log/messenges:

diald: calling site 0.0.0.0
chat: abort on (busy)
chat: abort on (error)
chat: abort on (no carrier)
chat: abort on (no dialtone)
chat: abort on (invalid login)
chat: abort on (login incorrect)
chat: report (connect)
chat: send (atz^m)
chat: expect (ok)
chat: atz^m^m
chat: ok
chat: -- got it
chat: send (atm0l0^m)
chat: expect (ok)
chat: ^m
chat: atm0l0^m^m
chat: error
chat: -- failed
chat: failed (error)
diald: connect script failed

i've made to manually type it in so i left time and some on out.
The modem i have to get working is a Diva T/A ISDN Modem connected at com1 on the e-smith server.

Hope you can help.

/gryf

[Gert-Jan Verheij]

I have the same problem I think,

I use e-smith 4.1.2. met the isdn4es scritp from Klaus J. Mueller (http://internet-sicherheit.net/isdn4es-howto.html), with a pci isdncard type 35 (HFC).

I have two accounts by two different providers.  All is working by the first provider. This provider gives the nameservers dynamish I know (when I use windows..)

The second provider (my own, xs4all) is NOT working and gives not dynamisch the nameservers.

In messages i see the follow:

Ut

Jun 17 13:59:29 e-smith chat[1398]: expect (OK)
Jun 17 13:59:29 e-smith chat[1398]: ATZ^M^M
Jun 17 13:59:29 e-smith chat[1398]: OK
Jun 17 13:59:29 e-smith chat[1398]:  -- got it
Jun 17 13:59:29 e-smith chat[1398]: send (AT&E503133669S14=3^M)
Jun 17 13:59:29 e-smith chat[1398]: expect (OK)
Jun 17 13:59:29 e-smith chat[1398]: ^M
Jun 17 13:59:29 e-smith chat[1398]: AT&E503133669S14=3^M^M
Jun 17 13:59:29 e-smith chat[1398]: OK
Jun 17 13:59:29 e-smith chat[1398]:  -- got it
Jun 17 13:59:29 e-smith chat[1398]: send (ATDT8500080^M)
Jun 17 13:59:30 e-smith chat[1398]: expect (CONNECT)
Jun 17 13:59:30 e-smith chat[1398]: ^M
Jun 17 13:59:32 e-smith chat[1398]: ATDT8500080^M^M
Jun 17 13:59:32 e-smith chat[1398]: CONNECT
Jun 17 13:59:32 e-smith chat[1398]:  -- got it
Jun 17 13:59:32 e-smith diald[744]: connector: chat:  Jun 17 13:59:32 CONNECT 64000/HDLC
Jun 17 13:59:32 e-smith diald[744]: Connected to site 0.0.0.0
Jun 17 13:59:32 e-smith diald[744]: Running pppd (pid = 1399).
Jun 17 13:59:32 e-smith diald[1399]: Running pppd: /usr/sbin/pppd -defaultroute -detach modem crtscts mtu 1500 mru 1500 name m7643703 noauth noipdefault ipparam diald
Jun 17 13:59:32 e-smith kernel: registered device ppp0
Jun 17 13:59:32 e-smith pppd[1399]: pppd 2.4.0 started by root, uid 0
Jun 17 13:59:32 e-smith pppd[1399]: Using interface ppp0
Jun 17 13:59:32 e-smith pppd[1399]: Connect: ppp0 <--> /dev/ttyI0
Jun 17 13:59:34 e-smith kernel: PPP BSD Compression module registered
Jun 17 13:59:34 e-smith kernel: PPP Deflate Compression module registered
Jun 17 13:59:34 e-smith pppd[1399]: local  IP address 130.89.190.122
Jun 17 13:59:34 e-smith pppd[1399]: remote IP address 130.89.239.2
Jun 17 13:59:35 e-smith diald[744]: New addresses: local 130.89.190.122, remote 130.89.239.2, broadcast 0.0.0.0
Jun 17 13:59:35 e-smith diald[744]: start ppp0: SIOCSIFMTU: Invalid argument
Jun 17 13:59:35 e-smith e-smith[1439]: Processing event: ip-change 130.89.190.122
Jun 17 13:59:35 e-smith e-smith[1439]: Running event handler: /etc/e-smith/events/ip-change/S15set-external-ip
Jun 17 13:59:36 e-smith atalkd[1358]: zip_getnetinfo for eth0
Jun 17 13:59:37 e-smith /etc/e-smith/events/ip-change/S15set-external-ip[1441]: /home/e-smith/configuration: OLD ExternalIP=194.109.241.228
Jun 17 13:59:37 e-smith /etc/e-smith/events/ip-change/S15set-external-ip[1441]: /home/e-smith/configuration: NEW ExternalIP=130.89.190.122
Jun 17 13:59:37 e-smith /etc/e-smith/events/ip-change/S15set-external-ip[1441]: /home/e-smith/configuration: OLD UnsavedChanges=yes
Jun 17 13:59:37 e-smith /etc/e-smith/events/ip-change/S15set-external-ip[1441]: /home/e-smith/configuration: NEW UnsavedChanges=no
Jun 17 13:59:37 e-smith e-smith[1439]: Running event handler: /etc/e-smith/events/ip-change/S16restart-masq
Jun 17 13:59:37 e-smith e-smith[1439]: Running event handler: /etc/e-smith/events/ip-change/S47proftpd-conf
Jun 17 13:59:38 e-smith e-smith-bg:
Jun 17 13:59:38 e-smith e-smith-bg: Shutting down IP masquerade and firewall rules:^I^IDone!
Jun 17 13:59:38 e-smith e-smith-bg:
Jun 17 13:59:39 e-smith e-smith[1439]: Running event handler: /etc/e-smith/events/ip-change/S50conf-security
Jun 17 13:59:41 e-smith e-smith[1439]: Running event handler: /etc/e-smith/events/ip-change/S55conf-httpd
Jun 17 13:59:41 e-smith e-smith-bg: Enabling IP masquerading: done
Jun 17 13:59:43 e-smith named[1393]: sysquery: findns error (NXDOMAIN) on ns.xs4all.nl?
Jun 17 13:59:43 e-smith named[1393]: sysquery: findns error (NXDOMAIN) on ns2.xs4all.nl?
Jun 17 13:59:43 e-smith e-smith[1439]: Running event handler: /etc/e-smith/events/ip-change/S75restart-httpd-full
Jun 17 13:59:44 e-smith e-smith[1439]: Running event handler: /etc/e-smith/events/ip-change/S80pptpd-conf
Jun 17 13:59:45 e-smith httpd-e-smith: Shutting down http:  succeeded
Jun 17 13:59:45 e-smith e-smith-bg: Shutting down http:  [   OK   ]^M
Jun 17 13:59:46 e-smith e-smith[1439]: Running event handler: /etc/e-smith/events/ip-change/S85update-dns
Jun 17 13:59:46 e-smith atalkd[1358]: zip_getnetinfo for eth0
Jun 17 13:59:47 e-smith e-smith[1439]: Running event handler: /etc/e-smith/events/ip-change/S90pptpd-restart
Jun 17 13:59:47 e-smith e-smith[1439]: Running event handler: /etc/e-smith/events/ip-change/S90restart-ntpd
Jun 17 13:59:49 e-smith e-smith[1658]: Processing event: ip-up ppp0 /dev/ttyI0 115200 130.89.190.122 130.89.239.2 diald
Jun 17 13:59:49 e-smith e-smith[1658]: Running event handler: /etc/e-smith/events/ip-up/S20email-ipup
Jun 17 13:59:49 e-smith httpd-e-smith: Starting httpd:  succeeded
Jun 17 13:59:49 e-smith e-smith-bg: Starting httpd:  [   OK   ]^M
Jun 17 13:59:50 e-smith e-smith[1658]: fetchmail: couldn't find canonical DNS name of pop.xs4all.nl
Jun 17 13:59:50 e-smith named[1393]: sysquery: findns error (NXDOMAIN) on ns.xs4all.nl?

Xs4all
Jun 17 14:53:21 e-smith chat[2040]: ATZ^M^M
Jun 17 14:53:21 e-smith chat[2040]: OK
Jun 17 14:53:21 e-smith chat[2040]:  -- got it
Jun 17 14:53:21 e-smith chat[2040]: send (AT&E503133669S14=3^M)
Jun 17 14:53:21 e-smith chat[2040]: expect (OK)
Jun 17 14:53:21 e-smith chat[2040]: ^M
Jun 17 14:53:21 e-smith chat[2040]: AT&E503133669S14=3^M^M
Jun 17 14:53:21 e-smith chat[2040]: OK
Jun 17 14:53:21 e-smith chat[2040]:  -- got it
Jun 17 14:53:21 e-smith chat[2040]: send (ATDT0592331278^M)
Jun 17 14:53:21 e-smith chat[2040]: expect (CONNECT)
Jun 17 14:53:21 e-smith chat[2040]: ^M
Jun 17 14:53:24 e-smith chat[2040]: ATDT0592331278^M^M
Jun 17 14:53:24 e-smith chat[2040]: CONNECT
Jun 17 14:53:24 e-smith chat[2040]:  -- got it
Jun 17 14:53:24 e-smith diald[1782]: connector: chat:  Jun 17 14:53:24 CONNECT 64000/HDLC
Jun 17 14:53:24 e-smith diald[1782]: Connected to site 0.0.0.0
Jun 17 14:53:24 e-smith diald[1782]: Running pppd (pid = 2041).
Jun 17 14:53:24 e-smith diald[2041]: Running pppd: /usr/sbin/pppd -defaultroute -detach modem crtscts mtu 1500 mru 1500 name gverheij noauth noipdefault ipparam diald
Jun 17 14:53:24 e-smith pppd[2041]: pppd 2.4.0 started by root, uid 0
Jun 17 14:53:24 e-smith pppd[2041]: Using interface ppp0
Jun 17 14:53:24 e-smith pppd[2041]: Connect: ppp0 <--> /dev/ttyI0
Jun 17 14:53:24 e-smith pppd[2041]: sent [LCP ConfReq id=0x1 ]
Jun 17 14:53:52 e-smith last message repeated 9 times
Jun 17 14:53:55 e-smith pppd[2041]: LCP: timeout sending Config-Requests
Jun 17 14:53:55 e-smith pppd[2041]: Connection terminated.
Jun 17 14:53:55 e-smith pppd[2041]: Exit.
Jun 17 14:53:55 e-smith diald[1782]: start sl0: SIOCSIFMTU: Invalid argument
Jun 17 14:53:55 e-smith diald[1782]: stop ppp0: RTNETLINK answers: No such process
Jun 17 14:53:55 e-smith kernel: ppp: ppp0 not active
Jun 17 14:53:55 e-smith diald[1782]: stop ppp0: SIOCSIFFLAGS: No such device or address
Jun 17 14:53:55 e-smith diald[1782]: Disconnected. Call duration 31 seconds.
Jun 17 14:53:55 e-smith diald[1782]: IP transmitted 2955 bytes and received 0 bytes.
Jun 17 14:53:55 e-smith kernel: isdn: HiSax,ch0 cause: E0010
Jun 17 14:53:56 e-smith diald[1782]: Delaying 10 seconds before clear to dial.

[Gryf]

Okay .. i got it to work

is just removed:

'OK' 'ATM0L0'

from my chat script... and now it works! Dont know what it does but ...

/gryf

[guestFF]

Any luck yet?

[guestFF]

Hi all,

Here's my /var/log/messages

It seems that the ppp deamon hangsup for no reason at all??

es4.1.2 / Passive ISDN HOW-TO applied / ppptd update for 4.1.2 installed

Any suggestions?

Jun 27 09:07:48 vandenbrand diald[743]: Delaying 10 seconds before clear to dial.
Jun 27 09:07:58 vandenbrand diald[743]: Calling site 0.0.0.0
Jun 27 09:07:59 vandenbrand chat[1538]: abort on (BUSY)
Jun 27 09:07:59 vandenbrand chat[1538]: abort on (ERROR)
Jun 27 09:07:59 vandenbrand chat[1538]: abort on (NO CARRIER)
Jun 27 09:07:59 vandenbrand chat[1538]: abort on (NO DIALTONE)
Jun 27 09:07:59 vandenbrand chat[1538]: abort on (Invalid Login)
Jun 27 09:07:59 vandenbrand chat[1538]: abort on (Login incorrect)
Jun 27 09:07:59 vandenbrand chat[1538]: report (CONNECT)
Jun 27 09:07:59 vandenbrand chat[1538]: send (ATZ^M)
Jun 27 09:07:59 vandenbrand chat[1538]: expect (OK)
Jun 27 09:07:59 vandenbrand chat[1538]: ATZ^M^M
Jun 27 09:07:59 vandenbrand chat[1538]: OK
Jun 27 09:07:59 vandenbrand chat[1538]:  -- got it
Jun 27 09:07:59 vandenbrand chat[1538]: send (AT&E123456S14=3^M)
Jun 27 09:07:59 vandenbrand chat[1538]: expect (OK)
Jun 27 09:07:59 vandenbrand chat[1538]: ^M
Jun 27 09:07:59 vandenbrand chat[1538]: AT&E123456S14=3^M^M
Jun 27 09:07:59 vandenbrand chat[1538]: OK
Jun 27 09:07:59 vandenbrand chat[1538]:  -- got it
Jun 27 09:07:59 vandenbrand chat[1538]: send (ATDTXXXXXXXXXX^M)
Jun 27 09:07:59 vandenbrand chat[1538]: expect (CONNECT)
Jun 27 09:07:59 vandenbrand chat[1538]: ^M
Jun 27 09:08:01 vandenbrand chat[1538]: ATDT0738800900^M^M
Jun 27 09:08:01 vandenbrand chat[1538]: CONNECT
Jun 27 09:08:01 vandenbrand chat[1538]:  -- got it
Jun 27 09:08:01 vandenbrand diald[743]: connector: chat:  Jun 27 09:08:01 CONNECT 64000/HDLC
Jun 27 09:08:01 vandenbrand diald[743]: Connected to site 0.0.0.0
Jun 27 09:08:01 vandenbrand diald[1539]: Running pppd: /usr/sbin/pppd -defaultroute -detach modem crtscts mtu 1500 mru 1500 name noauth noipdefault ipparam diald
Jun 27 09:08:01 vandenbrand pppd[1539]: pppd 2.4.0 started by root, uid 0
Jun 27 09:08:01 vandenbrand pppd[1539]: Using interface ppp0
Jun 27 09:08:01 vandenbrand pppd[1539]: Connect: ppp0 <--> /dev/ttyI0
Jun 27 09:08:01 vandenbrand diald[743]: Running pppd (pid = 1539).
Jun 27 09:08:10 vandenbrand pppd[1539]: Hangup (SIGHUP)
Jun 27 09:08:10 vandenbrand pppd[1539]: Modem hangup
Jun 27 09:08:10 vandenbrand pppd[1539]: Connection terminated.
Jun 27 09:08:10 vandenbrand pppd[1539]: Exit.
Jun 27 09:08:10 vandenbrand diald[743]: start sl0: SIOCSIFMTU: Invalid argument
Jun 27 09:08:11 vandenbrand diald[743]: stop ppp0: RTNETLINK answers: No such process
Jun 27 09:08:11 vandenbrand diald[743]: stop ppp0: SIOCSIFFLAGS: No such device or address
Jun 27 09:08:11 vandenbrand diald[743]: Disconnected. Call duration 10 seconds.
Jun 27 09:08:11 vandenbrand diald[743]: IP transmitted 135 bytes and received 0 bytes.
Jun 27 09:08:12 vandenbrand diald[743]: Delaying 10 seconds before clear to dial.

[Klaus J. Mueller]

Hi *,

in a PM RequestedDeletion sent me he pointed out that the following helped him solve the problem:

- don't append "S14=3" to the init-string
- include "L0M0" in the init string

that makes:
/sbin/e-smith/config set ModemInit "L0M0&E123456"

This problem (Hsing Foo called it the "LCP problem") only seems to occur with
some providers. I cannot confirm this solution as I cannot reproduce the problem

Can anyone who has experienced the LCP problem please test this solution and
let us know here, whether it helped?

In case it does solve the problem I would like to extend my howto by this information.

Thanx to RequestedDeletion for his suggestion.

Regards, K.

[Kees Blokland]

Fresh from the disk ( like less than an hour ago..)

I finally got my isdn/UK going, learned a lot in the process and have some tips about getting more/better logs.

I just dumped some in-progress docs on my website, have a look

http://www.blokland.co.uk/Kees/docs/e-smith/isdn4es.htm

http://www.blokland.co.uk/Kees/docs/e-smith/debug-modem-howto.htm

http://www.blokland.co.uk/Kees/docs/e-smith/ISDN-working.htm


hope this gives you some ideas about debugging!

Most important solution to at least my problem was the 'sync'  and the use of a zero in my msn.
I know, I've read every bit of paper that says: UK-MSN=0, BUT with the phonenumber it worked, The connection was there etc. The only 'problem' was that I could only ping my local external ip and the remote ip, nothing else..
This is one to remember!

The docs are work in progress. I mentioned something about ntpd not working properly, it does seem to work now, all due to a silly 0!!!

have fun

kees blokland.


ps.
Klaus, maybe you can add some of this stuff to your pages? I'll try to make it into a more coherent story.. let me know..

[Gert-Jan Verheij]

Thankx, this is the solution! Sorry for the late reaction...

Anybody who knows how to work with two ISDN lines and E-smith?


Greetings Gert-Jan

[guestFF]

Hi Gert-Jan,

THIS is a subject that I like to know more about. There was a thead about using multiple ISDN B-channels, it said it was not possible due to the way SME (E-smith) works....

I'm glad you got it working. Can you summarize your problem/solution pls.?

Regards,

RequestedDeletion

[Gert-Jan Verheij]

Klaus J. Mueller (kjm_AT_internet-sicherheit.net)
Date:   08-13-01 16:52

Hi *,

in a PM RequestedDeletion sent me he pointed out that the following helped him solve the problem:

- don't append "S14=3" to the init-string
- include "L0M0" in the init string

that makes:
/sbin/e-smith/config set ModemInit "L0M0&E123456"

In answer to your question, RequestedDeletion, I have used this remarks of Klaus J. Mueller,

I don't have a solution for ISDN2 on this moment, I will possible search for it in future....

Gert-Jan