Koozali.org: home of the SME Server
  1. Koozali.org: home of the SME Server
  2. Legacy Forums
  3. Experienced User Forum
  4. Topic: OpenVPN bridge Howto
« previous next »
Pages: [1]   Go Down

OpenVPN bridge Howto

  • 9 Replies
  • 2000 Views

cyr

OpenVPN bridge Howto
« on: July 13, 2005, 04:14:07 PM »
Hello,

I made an HowTo based on the excellent Howto of Swerts Knudsen, to implement OpenVPN on bridge configuration (cf http://openvpn.net/faq.html#bridge1 )

You will find The Howto at ftp://ftp.firewall-services.com/OpenVPN/HowtoOpenVPN.pdf

I am waiting for your comments

Cyr
Logged

Offline jester

  • *
  • 496
  • +1/-0
OpenVPN bridge Howto
« Reply #1 on: July 13, 2005, 09:36:19 PM »
@Cyr: link don't work?!

Jester.
Logged

Offline Franco

  • *
  • 1,171
  • +0/-0
    • http://contribs.org
OpenVPN bridge Howto
« Reply #2 on: July 13, 2005, 10:22:47 PM »
Logged

artful

tried this, did not work
« Reply #3 on: July 17, 2005, 10:25:20 PM »
After installing openVPN I lost all contact with my 6.5 gateway & server.

I guess my mistake was with the ip addressing.
can someone help me?

my network is as follows
WAN       IP 172.19.3.1 mask 255.255.0.0
EXTERNAL  IP 172.19.3.2 mask 255.255.0.0
INTERNAL  IP 10.0.0.200 mask 255.255.255.0
LAN RANGE IP 10.0.0.10 TO 199 mask 255.255.255.0

vpn lan range 10.0.1.100 to 120 mask 255.255.255.0

don't really know why it failed.
Logged

cyr

OpenVPN bridge Howto
« Reply #4 on: July 18, 2005, 09:56:38 AM »
What method did you want to use, bridging or routing, because if you want to use the bridging method, you'll have to choose a vpn lan range in your lan range, outside the dhcp range.
In your case, 10.0.0.200/24 to 10.0.0.255/24

Cyr
Logged

artful

OpenVPN bridge Howto
« Reply #5 on: July 18, 2005, 01:27:13 PM »
That's one of the things I don't know, Bridging' or Routing'(????)

I have been supplied with a router by my ISP.
I was initially running a 'server-only' mode but I was unable to set the router up as my previous draytek router.

Now I am trying to have a 'server&gateway' box with a dumb router.

My router has a dedicated connection with the dhcp, firewall and security all OFF.

So now my question is:
do I bridge or route my system?
and then, how can I get the openVPN to work?
Logged

cyr

OpenVPN bridge Howto
« Reply #6 on: July 18, 2005, 02:58:55 PM »
Logged

cyr

OpenVPN bridge Howto
« Reply #7 on: July 20, 2005, 11:53:10 AM »
I made an update of the Howto, if you want you can take it at ftp://ftp.firewall-services.com/OpenVPN/HowtoOpenVPN.pdf

Cyr
Logged

artful

OpenVPN bridge Howto
« Reply #8 on: July 30, 2005, 01:21:49 AM »
I finally got my openvpn connection up and running (client/server).  how do I connect to a PC on my server-side LAN?
Logged

Offline crazybob

  • *****
  • 894
  • +0/-0
    • Stalzer R&D
OpenVPN bridge Howto
« Reply #9 on: July 31, 2005, 10:01:03 PM »
Does anyone have a sme server-to-server bridge running? I am interested, and may try in a couple of weeks. I have a couple of customers that I could attempt this with and would like any heads up before I start. I saw from Knuddi how to set up the server, just need to play with the "client" SME server configuration.

Thanks

Bob
Logged
If you think you know whats going on, you obviously have no idea whats going on!
Pages: [1]   Go Up
« previous next »
  1. Koozali.org: home of the SME Server
  2. Legacy Forums
  3. Experienced User Forum
  4. Topic: OpenVPN bridge Howto