Gallery2 install feedback

sad111

Gallery2 install feedback

« on: September 13, 2006, 12:41:08 PM »

I have revamped the install script to work from /opt now.
I would like feedback from a developer to see if it is in line with standard?
I would also like testers to check for bugs.
I know this seems like alot of trouble for something so simple but I was using it as a learning experience.
If all is well than I can work on other scripts and learn howto build RPMs.

Thanks.

http://www.linux-one.org/gallery-final/gallery2-install.tar.gz

Logged

gpptsi

Gallery2 install feedback

« Reply #1 on: December 20, 2006, 12:45:23 AM »

Before I try this and attempt.
Are these any other dependencies that I need before the install?
I just have a base load of 7.0 Final and PHPBB2 running.

Let me know.

Thanks,

Logged

gpptsi

Gallery2 install feedback

« Reply #2 on: December 20, 2006, 02:02:29 AM »

Works!!!!!
Simple. Now just move this in to the HOW - To

I've been looking for the for weeks now.

Logged

gpptsi

Gallery2 install feedback

« Reply #3 on: December 20, 2006, 06:26:52 AM »

Any chance of someone helping me locate ImageMagick.
I've been looking now for hours...Both on this site, Google and Gallery2 site.

I know the commands for install, as it was located within this forum,

yum --enablerepo=base install ImageMagick

But where can I download the ImageMagick package.

Thanks,

Logged

cactus

4,880
+3/-0

Gallery2 install feedback

« Reply #4 on: December 20, 2006, 08:20:10 AM »

Quote from: "gpptsi"

Any chance of someone helping me locate ImageMagick.
I've been looking now for hours...Both on this site, Google and Gallery2 site.

I know the commands for install, as it was located within this forum,

yum --enablerepo=base install ImageMagick

But where can I download the ImageMagick package.

Thanks,

You can download a suitable ImageMagick rpm from the base repositorie indeed, using yum it is downloaded and installed automatically. The website of ImageMagick is www.imagemagick.org.

Logged

Be careful whose advice you buy, but be patient with those who supply it. Advice is a form of nostalgia, dispensing it is a way of fishing the past from the disposal, wiping it off, painting over the ugly parts and recycling it for more than its worth ~ Baz Luhrmann - Everybody's Free (To Wear Sunscreen)

piran

502
+0/-0

Gallery2 install feedback

« Reply #5 on: December 20, 2006, 03:15:27 PM »

<You can download a suitable ImageMagick rpm from
the base repositorie indeed, using yum it is downloaded
and installed automatically.>

So it is... in a manner of speaking.
This is what I got when I did thus:

Code: [Select]

2006-12-20 1355hrs local


[root@teri tmp]# mkdir test
[root@teri tmp]# cd test
[root@teri test]# yum --enablerepo=base install ImageMagick
==============================================================
WARNING: Additional commands may be required after running yum
==============================================================
Loading "smeserver" plugin
Loading "fastestmirror" plugin
Setting up Install Process
Setting up repositories
smeaddons                 100% |=========================|  951 B    00:00
base                      100% |=========================| 1.1 kB    00:00
smeos                     100% |=========================|  951 B    00:00
smeupdates                100% |=========================|  951 B    00:00
Loading mirror speeds from cached hostfile
Reading repository metadata in from local files
primary.xml.gz            100% |=========================| 569 kB    00:02
base      : ################################################## 1500/1500
Added 1500 new packages, deleted 0 old in 7.79 seconds
primary.xml.gz            100% |=========================|  54 kB    00:00
http://mirror.contribs.org/smeserver/releases/7/smeupdates/i386/repodata/primary.xml.gz: [Errno -1] Metadata file does n                             ot match checksum
Trying other mirror.
primary.xml.gz            100% |=========================|  54 kB    00:00
http://mirror.contribs.org/smeserver/releases/7/smeupdates/i386/repodata/primary.xml.gz: [Errno -1] Metadata f                             ile does not match checksum
Trying other mirror.
primary.xml.gz            100% |=========================|  56 kB    00:00
smeupdates: ################################################## 93/93
Added 3 new packages, deleted 0 old in 0.17 seconds
Parsing package install arguments
Resolving Dependencies
--> Populating transaction set with selected packages. Please wait.
---> Downloading header for ImageMagick to pack into transaction set.
ImageMagick-6.0.7.1-14.i3 100% |=========================|  42 kB    00:00
---> Package ImageMagick.i386 0:6.0.7.1-14 set to be updated
--> Running transaction check
--> Processing Dependency: libXt.so.6 for package: ImageMagick
--> Processing Dependency: libdpstk.so.1 for package: ImageMagick
--> Processing Dependency: libX11.so.6 for package: ImageMagick
--> Processing Dependency: libSM.so.6 for package: ImageMagick
--> Processing Dependency: libICE.so.6 for package: ImageMagick
--> Processing Dependency: libdps.so.1 for package: ImageMagick
--> Processing Dependency: libXext.so.6 for package: ImageMagick
--> Restarting Dependency Resolution with new changes.
--> Populating transaction set with selected packages. Please wait.
---> Downloading header for xorg-x11-libs to pack into transaction set.
xorg-x11-libs-6.8.2-1.EL. 100% |=========================| 287 kB    00:01
---> Package xorg-x11-libs.i386 0:6.8.2-1.EL.13.37 set to be updated
--> Running transaction check
--> Processing Dependency: libfontconfig.so.1 for package: xorg-x11-libs
--> Processing Dependency: libGL.so.1 for package: xorg-x11-libs
--> Restarting Dependency Resolution with new changes.
--> Populating transaction set with selected packages. Please wait.
---> Downloading header for fontconfig to pack into transaction set.
fontconfig-2.2.3-7.centos 100% |=========================|  11 kB    00:00
---> Package fontconfig.i386 0:2.2.3-7.centos4 set to be updated
---> Downloading header for xorg-x11-Mesa-libGL to pack into transaction set.
xorg-x11-Mesa-libGL-6.8.2 100% |=========================| 254 kB    00:01
---> Package xorg-x11-Mesa-libGL.i386 0:6.8.2-1.EL.13.37 set to be updated
--> Running transaction check

Dependencies Resolved

=============================================================================
 Package                 Arch       Version          Repository        Size
=============================================================================
Installing:
 ImageMagick             i386       6.0.7.1-14       base              2.4 M
Installing for dependencies:
 fontconfig              i386       2.2.3-7.centos4  smeos             117 k
 xorg-x11-Mesa-libGL     i386       6.8.2-1.EL.13.37  base              378 k
 xorg-x11-libs           i386       6.8.2-1.EL.13.37  base              2.7 M

Transaction Summary
=============================================================================
Install      4 Package(s)
Update       0 Package(s)
Remove       0 Package(s)
Total download size: 5.5 M
Is this ok [y/N]: y
Downloading Packages:
(1/4): ImageMagick-6.0.7. 100% |=========================| 2.4 MB    00:10
(2/4): fontconfig-2.2.3-7 100% |=========================| 117 kB    00:00
(3/4): xorg-x11-Mesa-libG 100% |=========================| 378 kB    00:01
(4/4): xorg-x11-libs-6.8. 100% |=========================| 2.7 MB    00:11
Running Transaction Test
Finished Transaction Test
Transaction Test Succeeded
Running Transaction
smeserver trap pre-install: ImageMagick
smeserver trap pre-install: fontconfig
smeserver trap pre-install: xorg-x11-Mesa-libGL
smeserver trap pre-install: xorg-x11-libs
  Installing: fontconfig                   ######################### [1/4]
  Installing: xorg-x11-libs                ######################### [2/4]
  Installing: ImageMagick                  ######################### [3/4]
  Installing: xorg-x11-Mesa-libGL          ######################### [4/4]
Migrating existing database yum_available
Migrating existing database networks
Migrating existing database yum_repositories
Migrating existing database yum_updates
Migrating existing database domains
Migrating existing database yum_installed
Migrating existing database spamassassin
Migrating existing database dar2
Migrating existing database mailpatterns
Migrating existing database backups
Migrating existing database configuration
Migrating existing database hosts
Migrating existing database accounts
Use of uninitialized value in substitution (s///) at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 237, <LEXIN> line 12.
Use of uninitialized value in subroutine entry at /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/XML/Parser/Expat.pm l                             ine 474.
Use of uninitialized value in print at /usr/lib/perl5/site_perl/CGI/FormMagick/Setup.pm line 179.
Use of uninitialized value in substitution (s///) at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 237, <LEXIN> line 23.
Use of uninitialized value in subroutine entry at /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/XML/Parser/Expat.pm l                             ine 474.
Use of uninitialized value in print at /usr/lib/perl5/site_perl/CGI/FormMagick/Setup.pm line 179.
Use of uninitialized value in substitution (s///) at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 237, <LEXIN> line 28.
Use of uninitialized value in subroutine entry at /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/XML/Parser/Expat.pm l                             ine 474.
Use of uninitialized value in print at /usr/lib/perl5/site_perl/CGI/FormMagick/Setup.pm line 179.
Use of uninitialized value in substitution (s///) at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 237, <LEXIN> line 29.
Use of uninitialized value in subroutine entry at /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/XML/Parser/Expat.pm l                             ine 474.
Use of uninitialized value in print at /usr/lib/perl5/site_perl/CGI/FormMagick/Setup.pm line 179.
Use of uninitialized value in substitution (s///) at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 237, <LEXIN> line 32.
Use of uninitialized value in subroutine entry at /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/XML/Parser/Expat.pm l                             ine 474.
Use of uninitialized value in print at /usr/lib/perl5/site_perl/CGI/FormMagick/Setup.pm line 179.
Use of uninitialized value in substitution (s///) at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 237, <LEXIN> line 33.
Use of uninitialized value in subroutine entry at /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/XML/Parser/Expat.pm l                             ine 474.
Use of uninitialized value in print at /usr/lib/perl5/site_perl/CGI/FormMagick/Setup.pm line 179.
Use of uninitialized value in substitution (s///) at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 237, <LEXIN> line 76.
Use of uninitialized value in subroutine entry at /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/XML/Parser/Expat.pm l                             ine 474.
Use of uninitialized value in print at /usr/lib/perl5/site_perl/CGI/FormMagick/Setup.pm line 179.
Use of uninitialized value in substitution (s///) at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 237, <LEXIN> line 87.
Use of uninitialized value in subroutine entry at /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/XML/Parser/Expat.pm l                             ine 474.
Use of uninitialized value in print at /usr/lib/perl5/site_perl/CGI/FormMagick/Setup.pm line 179.
Use of uninitialized value in substitution (s///) at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 237, <LEXIN> line 92.
Use of uninitialized value in subroutine entry at /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/XML/Parser/Expat.pm l                             ine 474.
Use of uninitialized value in print at /usr/lib/perl5/site_perl/CGI/FormMagick/Setup.pm line 179.
Use of uninitialized value in substitution (s///) at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 237, <LEXIN> line 93.
Use of uninitialized value in subroutine entry at /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/XML/Parser/Expat.pm l                             ine 474.
Use of uninitialized value in print at /usr/lib/perl5/site_perl/CGI/FormMagick/Setup.pm line 179.
Use of uninitialized value in substitution (s///) at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 237, <LEXIN> line 96.
Use of uninitialized value in subroutine entry at /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/XML/Parser/Expat.pm l                             ine 474.
Use of uninitialized value in print at /usr/lib/perl5/site_perl/CGI/FormMagick/Setup.pm line 179.
Use of uninitialized value in substitution (s///) at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 237, <LEXIN> line 97.
Use of uninitialized value in subroutine entry at /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/XML/Parser/Expat.pm l                             ine 474.
Use of uninitialized value in print at /usr/lib/perl5/site_perl/CGI/FormMagick/Setup.pm line 179.
Use of uninitialized value in substitution (s///) at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 237, <LEXIN> line 140.
Use of uninitialized value in subroutine entry at /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/XML/Parser/Expat.pm l                             ine 474.
Use of uninitialized value in print at /usr/lib/perl5/site_perl/CGI/FormMagick/Setup.pm line 179.
Use of uninitialized value in substitution (s///) at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 237, <LEXIN> line 151.
Use of uninitialized value in subroutine entry at /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/XML/Parser/Expat.pm l                             ine 474.
Use of uninitialized value in print at /usr/lib/perl5/site_perl/CGI/FormMagick/Setup.pm line 179.
Use of uninitialized value in substitution (s///) at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 237, <LEXIN> line 156.
Use of uninitialized value in subroutine entry at /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/XML/Parser/Expat.pm l                             ine 474.
Use of uninitialized value in print at /usr/lib/perl5/site_perl/CGI/FormMagick/Setup.pm line 179.
Use of uninitialized value in substitution (s///) at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 237, <LEXIN> line 157.
Use of uninitialized value in subroutine entry at /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/XML/Parser/Expat.pm l                             ine 474.
Use of uninitialized value in print at /usr/lib/perl5/site_perl/CGI/FormMagick/Setup.pm line 179.
Use of uninitialized value in substitution (s///) at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 237, <LEXIN> line 160.
Use of uninitialized value in subroutine entry at /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/XML/Parser/Expat.pm l                             ine 474.
Use of uninitialized value in print at /usr/lib/perl5/site_perl/CGI/FormMagick/Setup.pm line 179.
Use of uninitialized value in substitution (s///) at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 237, <LEXIN> line 161.
Use of uninitialized value in subroutine entry at /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/XML/Parser/Expat.pm l                             ine 474.
Use of uninitialized value in print at /usr/lib/perl5/site_perl/CGI/FormMagick/Setup.pm line 179.
Use of uninitialized value in substitution (s///) at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 237, <LEXIN> line 205.
Use of uninitialized value in subroutine entry at /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/XML/Parser/Expat.pm l                             ine 474.
Use of uninitialized value in print at /usr/lib/perl5/site_perl/CGI/FormMagick/Setup.pm line 179.
Use of uninitialized value in substitution (s///) at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 237, <LEXIN> line 216.
Use of uninitialized value in subroutine entry at /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/XML/Parser/Expat.pm l                             ine 474.
Use of uninitialized value in print at /usr/lib/perl5/site_perl/CGI/FormMagick/Setup.pm line 179.
Use of uninitialized value in substitution (s///) at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 237, <LEXIN> line 221.
Use of uninitialized value in subroutine entry at /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/XML/Parser/Expat.pm l                             ine 474.
Use of uninitialized value in print at /usr/lib/perl5/site_perl/CGI/FormMagick/Setup.pm line 179.
Use of uninitialized value in substitution (s///) at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 237, <LEXIN> line 222.
Use of uninitialized value in subroutine entry at /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/XML/Parser/Expat.pm l                             ine 474.
Use of uninitialized value in print at /usr/lib/perl5/site_perl/CGI/FormMagick/Setup.pm line 179.
Use of uninitialized value in substitution (s///) at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 237, <LEXIN> line 225.
Use of uninitialized value in subroutine entry at /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/XML/Parser/Expat.pm l                             ine 474.
Use of uninitialized value in print at /usr/lib/perl5/site_perl/CGI/FormMagick/Setup.pm line 179.
Use of uninitialized value in substitution (s///) at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 237, <LEXIN> line 226.
Use of uninitialized value in subroutine entry at /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/XML/Parser/Expat.pm l                             ine 474.
Use of uninitialized value in print at /usr/lib/perl5/site_perl/CGI/FormMagick/Setup.pm line 179.
Use of uninitialized value in substitution (s///) at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 237, <LEXIN> line 270.
Use of uninitialized value in subroutine entry at /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/XML/Parser/Expat.pm l                             ine 474.
Use of uninitialized value in print at /usr/lib/perl5/site_perl/CGI/FormMagick/Setup.pm line 179.
Use of uninitialized value in substitution (s///) at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 237, <LEXIN> line 281.
Use of uninitialized value in subroutine entry at /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/XML/Parser/Expat.pm l                             ine 474.
Use of uninitialized value in print at /usr/lib/perl5/site_perl/CGI/FormMagick/Setup.pm line 179.
Use of uninitialized value in substitution (s///) at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 237, <LEXIN> line 286.
Use of uninitialized value in subroutine entry at /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/XML/Parser/Expat.pm l                             ine 474.
Use of uninitialized value in print at /usr/lib/perl5/site_perl/CGI/FormMagick/Setup.pm line 179.
Use of uninitialized value in substitution (s///) at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 237, <LEXIN> line 287.
Use of uninitialized value in subroutine entry at /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/XML/Parser/Expat.pm l                             ine 474.
Use of uninitialized value in print at /usr/lib/perl5/site_perl/CGI/FormMagick/Setup.pm line 179.
Use of uninitialized value in substitution (s///) at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 237, <LEXIN> line 290.
Use of uninitialized value in subroutine entry at /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/XML/Parser/Expat.pm l                             ine 474.
Use of uninitialized value in print at /usr/lib/perl5/site_perl/CGI/FormMagick/Setup.pm line 179.
Use of uninitialized value in substitution (s///) at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 237, <LEXIN> line 291.
Use of uninitialized value in subroutine entry at /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/XML/Parser/Expat.pm l                             ine 474.
Use of uninitialized value in print at /usr/lib/perl5/site_perl/CGI/FormMagick/Setup.pm line 179.
Use of uninitialized value in substitution (s///) at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 237, <LEXIN> line 334.
Use of uninitialized value in subroutine entry at /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/XML/Parser/Expat.pm l                             ine 474.
Use of uninitialized value in print at /usr/lib/perl5/site_perl/CGI/FormMagick/Setup.pm line 179.
Use of uninitialized value in substitution (s///) at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 237, <LEXIN> line 345.
Use of uninitialized value in subroutine entry at /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/XML/Parser/Expat.pm l                             ine 474.
Use of uninitialized value in print at /usr/lib/perl5/site_perl/CGI/FormMagick/Setup.pm line 179.
Use of uninitialized value in substitution (s///) at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 237, <LEXIN> line 350.
Use of uninitialized value in subroutine entry at /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/XML/Parser/Expat.pm l                             ine 474.
Use of uninitialized value in print at /usr/lib/perl5/site_perl/CGI/FormMagick/Setup.pm line 179.
Use of uninitialized value in substitution (s///) at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 237, <LEXIN> line 351.
Use of uninitialized value in subroutine entry at /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/XML/Parser/Expat.pm l                             ine 474.
Use of uninitialized value in print at /usr/lib/perl5/site_perl/CGI/FormMagick/Setup.pm line 179.
Use of uninitialized value in substitution (s///) at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 237, <LEXIN> line 354.
Use of uninitialized value in subroutine entry at /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/XML/Parser/Expat.pm l                             ine 474.
Use of uninitialized value in print at /usr/lib/perl5/site_perl/CGI/FormMagick/Setup.pm line 179.
Use of uninitialized value in substitution (s///) at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 237, <LEXIN> line 355.
Use of uninitialized value in subroutine entry at /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/XML/Parser/Expat.pm l                             ine 474.
Use of uninitialized value in print at /usr/lib/perl5/site_perl/CGI/FormMagick/Setup.pm line 179.
Use of uninitialized value in substitution (s///) at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 237, <LEXIN> line 399.
Use of uninitialized value in subroutine entry at /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/XML/Parser/Expat.pm l                             ine 474.
Use of uninitialized value in print at /usr/lib/perl5/site_perl/CGI/FormMagick/Setup.pm line 179.
Use of uninitialized value in substitution (s///) at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 237, <LEXIN> line 410.
Use of uninitialized value in subroutine entry at /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/XML/Parser/Expat.pm l                             ine 474.
Use of uninitialized value in print at /usr/lib/perl5/site_perl/CGI/FormMagick/Setup.pm line 179.
Use of uninitialized value in substitution (s///) at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 237, <LEXIN> line 415.
Use of uninitialized value in subroutine entry at /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/XML/Parser/Expat.pm l                             ine 474.
Use of uninitialized value in print at /usr/lib/perl5/site_perl/CGI/FormMagick/Setup.pm line 179.
Use of uninitialized value in substitution (s///) at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 237, <LEXIN> line 416.
Use of uninitialized value in subroutine entry at /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/XML/Parser/Expat.pm l                             ine 474.
Use of uninitialized value in print at /usr/lib/perl5/site_perl/CGI/FormMagick/Setup.pm line 179.
Use of uninitialized value in substitution (s///) at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 237, <LEXIN> line 419.
Use of uninitialized value in subroutine entry at /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/XML/Parser/Expat.pm l                             ine 474.
Use of uninitialized value in print at /usr/lib/perl5/site_perl/CGI/FormMagick/Setup.pm line 179.
Use of uninitialized value in substitution (s///) at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 237, <LEXIN> line 420.
Use of uninitialized value in subroutine entry at /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/XML/Parser/Expat.pm l                             ine 474.
Use of uninitialized value in print at /usr/lib/perl5/site_perl/CGI/FormMagick/Setup.pm line 179.
smeserver trap post-install: ImageMagick
smeserver trap post-install: fontconfig
smeserver trap post-install: xorg-x11-Mesa-libGL
smeserver trap post-install: xorg-x11-libs

Installed: ImageMagick.i386 0:6.0.7.1-14
Dependency Installed: fontconfig.i386 0:2.2.3-7.centos4 xorg-x11-Mesa-libGL.i386 0:6.8.2-1.EL.13.37 xorg-x11-libs.i386 0:6.8.2-1                             .EL.13.37
Complete!
==============================================================
WARNING: You now need to run BOTH of the following commands
to ensure consistent system state:

signal-event post-upgrade; signal-event reboot

You should run these commands unless you are certain that
yum made no changes to your system.
==============================================================
[root@teri test]#

After running the two suggested commands I tried ImageMagick.
My Gallery2 stuff could usefully run with IM but when I tried to
shoehorn it towards IM its (G2's) tester algorithm reported:

Code: [Select]

ImageMagick binary test results
Binary Name 	Pass/Fail
identify 	
Passed
convert 	
Passed
composite 	
Passed
Version

ImageMagick 6.0.7

Warning: This version of ImageMagick has a known vulnerability that can be exploited to cause infinite loops. You may wish to upgrade. This determination may be inaccurate for Debian.
Use this version anyway
Supported MIME Types

The ImageMagick module can support files with the following MIME types:

image/gif
image/jpeg
image/pjpeg
image/png
image/tiff
image/svg+xml
image/bmp
application/photoshop
image/x-photo-cd
image/tga
image/jpeg-cmyk
image/tiff-cmyk

The bottom line seems to be SME7 appears to be installing a 'known' (?)
aged or cracked version and does so with wads of error lines reported.
Presumably I've done something wrong, I'd welcome a workaround
other than uninstalling and having to go back to using good old GD;~/

Logged

gpptsi

Gallery2 install feedback

« Reply #6 on: December 20, 2006, 05:04:00 PM »

Maybe I'm doing something wrong but when i run

Code: [Select]

[root@teri test]# yum --enablerepo=base install ImageMagick 
============================================================== 
WARNING: Additional commands may be required after running yum 
==============================================================

It just sits there and does nothing. Just the above is displayed.
Is there a setup for yum that I'm missing, I know it was installed through the software install in controll pannel upon initiall setup.

Logged

cactus

4,880
+3/-0

Gallery2 install feedback

« Reply #7 on: December 20, 2006, 07:58:37 PM »

Quote from: "piran"

Code: [Select]
Use of uninitialized value in substitution (s///) at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 237, <LEXIN> line 12. Use of uninitialized value in subroutine entry at /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/XML/Parser/Expat.pm line 474.

Those errors are a known thing when installing contribs. I have noticed them every now and then as well, they are generated because of little bugs in configuration panels in contribs you installed. As long as server-manager is working properly I should not be to worried about it.

Quote from: "piran"

Code: [Select]
Installed: ImageMagick.i386 0:6.0.7.1-14 Dependency Installed: fontconfig.i386 0:2.2.3-7.centos4 xorg-x11-Mesa-libGL.i386 0:6.8.2-1.EL.13.37 xorg-x11-libs.i386 0:6.8.2-1 .EL.13.37 Complete!

Above messages means install is succesfull.

Quote from: "piran"

After running the two suggested commands I tried ImageMagick.
My Gallery2 stuff could usefully run with IM but when I tried to
shoehorn it towards IM its (G2's) tester algorithm reported:
Code: [Select]
ImageMagick binary test results Binary Name Pass/Fail identify Passed convert Passed composite Passed Version ImageMagick 6.0.7 Warning: This version of ImageMagick has a known vulnerability that can be exploited to cause infinite loops. You may wish to upgrade. This determination may be inaccurate for Debian. Use this version anyway Supported MIME Types The ImageMagick module can support files with the following MIME types: image/gif image/jpeg image/pjpeg image/png image/tiff image/svg+xml image/bmp application/photoshop image/x-photo-cd image/tga image/jpeg-cmyk image/tiff-cmyk

The bottom line seems to be SME7 appears to be installing a 'known' (?)
aged or cracked version and does so with wads of error lines reported.
Presumably I've done something wrong, I'd welcome a workaround
other than uninstalling and having to go back to using good old GD;~/

There is nothing to worry as discussed in this thread already as smeos provides ImageMagick.i386 0:6.0.7.1-14 which has the fix for the error suggested by the gallery2 interface. You can safely use this version.

Logged

Be careful whose advice you buy, but be patient with those who supply it. Advice is a form of nostalgia, dispensing it is a way of fishing the past from the disposal, wiping it off, painting over the ugly parts and recycling it for more than its worth ~ Baz Luhrmann - Everybody's Free (To Wear Sunscreen)

sad111

Gallery2 install feedback

« Reply #8 on: December 21, 2006, 10:13:44 PM »

How can I submit to the HOWTO'S?
Also glad to hear it works.
I thought about putting Imagemagic in but haven't got that far yet.

Logged

gpptsi

Gallery2 install feedback

« Reply #9 on: December 22, 2006, 05:34:11 PM »

Not sure as I think that the Archived Wiki is not working.

Logged

svangool

73
+0/-0

Gallery2 install feedback

« Reply #10 on: December 24, 2006, 11:54:55 PM »

Everything seems to work very well, good job!
The only thing I'm worried about is the security, the outside can see almost every file including the G2data directory (containing security information).
I think it would be more secure to put this in an I-bay in stead of the /opt directory and/or adjust httpd.conf accordingly with templating.

Thanks, Sjef.

Logged

......

william_syd

1,608
+0/-0
Nothing to see here.

Gallery2 install feedback

« Reply #11 on: December 25, 2006, 12:22:37 AM »

Quote from: "svangool"

Everything seems to work very well, good job!
The only thing I'm worried about is the security, the outside can see almost every file including the G2data directory (containing security information).
I think it would be more secure to put this in an I-bay in stead of the /opt directory and/or adjust httpd.conf accordingly with templating.

Thanks, Sjef.

There is a template..

Code: [Select]

#---------------------
# gallery
#---------------------

Alias /gallery  /opt/gallery

<Directory /opt/gallery>
    Options None
    Options +Indexes
    Options +Includes
    AllowOverride None
    order deny,allow
    deny from all
    allow from all
AddType application/x-httpd-php .php .php3 .phtml
php_admin_value open_basedir /opt/gallery:/home/e-smith/files/ibays:/tmp
</Directory>

Options +Indexes ?

Logged

Regards,
William

IF I give advise.. It's only if it was me....

svangool

73
+0/-0

Gallery2 install feedback

« Reply #12 on: December 25, 2006, 09:21:58 PM »

Good catch William !

Code: [Select]

pico /etc/e-smith/templates/etc/httpd/conf/httpd.conf/91gallery

Remove the Options +Indexes line

Code: [Select]

expand-template /etc/httpd/conf/httpd.conf
svc -t /service/httpd-e-smith

Fixed it, no directories visible anymore, thanks!

But I still find it a problem you have access to individual files from external. So if you know the structure of gallery2, you can still access them: e.g. you can read the configuration authentication file by "http://www.server.com/gallery/login.txt" or try "http://www.server.com/gallery/g2data/versions.dat" with the default setting of this contrib.

Doesn't feel good.

Sjef.

Logged

......

cactus

4,880
+3/-0

Gallery2 install feedback

« Reply #13 on: December 25, 2006, 09:40:04 PM »

Quote from: "svangool"

Good catch William !

Code: [Select]
pico /etc/e-smith/templates/etc/httpd/conf/httpd.conf/91gallery

Remove the Options +Indexes line

Code: [Select]
expand-template /etc/httpd/conf/httpd.conf svc -t /service/httpd-e-smith

Fixed it, no directories visible anymore, thanks!

But I still find it a problem you have access to individual files from external. So if you know the structure of gallery2, you can still access them: e.g. you can read the configuration authentication file by "http://www.server.com/gallery/login.txt" or try "http://www.server.com/gallery/g2data/versions.dat" with the default setting of this contrib.

Doesn't feel good.

Sjef.

That is a failure in your configuration. Your gallery2 data directory does not need to be visible from the web to display images. You should place the gallery2data somewhere where the user for which the httpd daemon is run (www) has access to it on the local file system of the web server but outside of the scope of the configuration entries (such as Aliasses) as set in httpd.conf.

I have installed gallery2 at my site as well but you cannot view my configuration data as this is not shared to users on the internet, as I placed the gallery2 data directory at the same level as the gallery2 program directory in the opt directory, and did not add it to the httpd.conf files.

The only section for my gallery2 installation (I installed it manually) in my httpd.conf file reads like this:

Code: [Select]

Alias /gallery2/ /opt/gallery2/
<Directory /opt/gallery2/>
    AddType application/x-httpd-php .php .php3 .phtml
    php_admin_value open_basedir /opt/gallery2/:/home/e-smith/files/ibays/Primary/html/
    Options None
    Options +Indexes
    Options +Includes
    AllowOverride None
    order deny,allow
    deny from all
    allow from all
</Directory>

I had to add the open_basedir section as i want to run multiple galleries (in this case from my Primary ibay as this holds my website) from the same source and did a installation of the sub set per gallery2 installer into the Primary ibay.

My gallery2 data is ocnfigured to be stored in the /opt/gallery2data directory which is not exposed to the web or any other user than the ones with console access.

Logged

Be careful whose advice you buy, but be patient with those who supply it. Advice is a form of nostalgia, dispensing it is a way of fishing the past from the disposal, wiping it off, painting over the ugly parts and recycling it for more than its worth ~ Baz Luhrmann - Everybody's Free (To Wear Sunscreen)

sad111

Thanks for the info.

« Reply #14 on: December 26, 2006, 07:46:31 PM »

I Want to thank you, and everyone who has been giving their input.
I will fix the options +indexes.
I'm going to look into writing a script to fix the problems,
but the main script will be fixed.
Cactus can you give me you're input as to what directory and scheme
you would use? I.E for g2data.

Thanks.

Logged