Topic: sme9admin on SME9.1_64

[calisun]

I have sme9admin installed on SME9.1_64
I see all info for network use and system performance working fine, but the server's hardware sensors section is all void of any data. How do I get it to show the data?

My server is:
DELL POWEREDGE R900 4U SERVER 4x XEON E7450 SIX CORE
It is using hardware RAID 10

[bunkobugsy]

Any luck with /usr/sbin/sensors-detect ?

[calisun]

Code: [Select]

/usr/sbin/sensors-detect
yes, I run the command, answered YES to all questions restarted the server and I still see nothing.

I did get this message while running the command:

Code: [Select]

Warning: the required module ipmisensors is not currently installed
on your system. If it is built into the kernel then it's OK.
Otherwise, check http://www.lm-sensors.org/wiki/Devices for
driver availability.

[stephdl]

what about if in a terminal you launch the command : sensors

[calisun]

after entering command: sensors
I see this:

Code: [Select]

coretemp-isa-0000
Adapter: ISA adapter
Core 0:      +33.0°C  (high = +86.0°C, crit = +100.0°C)
Core 1:      +36.0°C  (high = +86.0°C, crit = +100.0°C)
Core 2:      +31.0°C  (high = +86.0°C, crit = +100.0°C)
Core 3:      +39.0°C  (high = +86.0°C, crit = +100.0°C)
Core 4:      +31.0°C  (high = +86.0°C, crit = +100.0°C)
Core 5:      +35.0°C  (high = +86.0°C, crit = +100.0°C)

coretemp-isa-0001
Adapter: ISA adapter
Core 0:      +33.0°C  (high = +86.0°C, crit = +100.0°C)
Core 1:      +37.0°C  (high = +86.0°C, crit = +100.0°C)
Core 2:      +31.0°C  (high = +86.0°C, crit = +100.0°C)
Core 3:      +34.0°C  (high = +86.0°C, crit = +100.0°C)
Core 4:      +31.0°C  (high = +86.0°C, crit = +100.0°C)
Core 5:      +31.0°C  (high = +86.0°C, crit = +100.0°C)

coretemp-isa-0002
Adapter: ISA adapter
Core 0:      +33.0°C  (high = +86.0°C, crit = +100.0°C)
Core 1:      +33.0°C  (high = +86.0°C, crit = +100.0°C)
Core 2:      +30.0°C  (high = +86.0°C, crit = +100.0°C)
Core 3:      +30.0°C  (high = +86.0°C, crit = +100.0°C)
Core 4:      +32.0°C  (high = +86.0°C, crit = +100.0°C)
Core 5:      +33.0°C  (high = +86.0°C, crit = +100.0°C)

coretemp-isa-0003
Adapter: ISA adapter
Core 0:      +35.0°C  (high = +86.0°C, crit = +100.0°C)
Core 1:      +29.0°C  (high = +86.0°C, crit = +100.0°C)
Core 2:      +28.0°C  (high = +86.0°C, crit = +100.0°C)
Core 3:      +30.0°C  (high = +86.0°C, crit = +100.0°C)
Core 4:      +29.0°C  (high = +86.0°C, crit = +100.0°C)
Core 5:      +26.0°C  (high = +86.0°C, crit = +100.0°C)


[stephdl]

go to the sme9admin settings and set the 'Core 0' and/or 'Core 1' as the sensors name (others can do it well also)

But as you can see lm_sensors is not working well on your computer, sme9admin is just doing a 'grep' of your sensors output and save it in the database, this is mine for example

Code: [Select]

[root@backup ~]# sensors
smsc47b397-isa-0480
Adapter: ISA adapter
fan1:       1868 RPM
fan2:          0 RPM
fan3:        892 RPM
fan4:       1027 RPM
temp1:       +52.0°C                                   
temp2:       +25.0°C                                   
temp3:       +37.0°C                                   
temp4:        +0.0°C